KB-600

2D Keyboard for Speed Dome

KB-600 KEYBOARD CONTROLLER

Introduction 

The 2D Controlling Keyboard can be used together with high/constant- speed dome cameras, decoders, etc. The electric outlet between the controlling keyboard and the receiving terminal is EIA/RS – 485, which enables the keyboard to control as many as 127 dome cameras or decoders within a maximal communication range of 1.2 Km. Using the controlling keyboard, you can easily control and set up for variable-speed dome cameras. The controlling keyboard can also directly control terminal decoders so that the control of the front devices such as the constant-speed pan/tilt, the lens, the light, the rain brush etc can be realized.

 

Characteristics

1. The keyboard output adopts photoelectric insulated 485 control so that it can provides strong anti-jamming and long-distance transmission.

2. Using the keyboard, you can set up dome camera or decoder address at the range of: 1~255.

3. Through the keyboard, variable-speed operation can be applied to the high speed dome camera.

4. Via the keyboard, pre-set positions and tour group can be setup and previewed in the high speed dome camera.

5. Lens zoom ratio, focus and iris can be manually controlled via the keyboard.

6. The keyboard has menu displaying LCD,2D controlling joystick.

 

Technical DATA

1. Protocol supported: Total Support about 5 different protocols including PELCO -D, PELCO –P.

2. Baud rate of communication:1200/2400/4800/9600/19200 BIT/S

3. Range of communication: 1200M (0.5MM twisted-pair)

4. Power supply: 9DC 500mA

5. Ambient temperature: 0--+60°C

6. Relative Humidity: below 90%RH

7. Dimension: 70(H) X 165(W) X 270(L) mm